Spinner 2200 S Automatic Orbital Stretch Wrapping Machine

What the Spinner 2200 S wraps

• Pallets and bed bases
• Bedroom and kitchen cabinets
• Sandwich panels and wood panels
• Aluminium, steel and wood profiles and pipes, PVC profile products

Minimum product size is 700 x 400 x 2000 mm (W x H x L), with no upper limit on product length.

How it works

The product is carried through the ring on a conveyor sized to the customer’s product range, while the film carriage rotates at 10 to 35 rpm, applying a continuous spiral of stretch film. Film width is up to 500 mm, with a maximum roll diameter of 230 mm on a 76 mm core, in 23, 30 or 35 micron thickness.

Key specifications

Product length	Unlimited
Min. product size (W x H x L)	700 x 400 x 2000 mm
Conveyor	Customised to customer’s request
Ring rotation speed	10-35 rpm
Stretch film	Up to 500 mm wide, 230 mm diameter, 76 mm core
Main motor power	4.4 kW (total power 5.6 kW)
Power supply	380 V, 50/60 Hz, 3P+N+PE
Machine size (W x L)	3450 x 3100 mm (height depends on conveyor length)

Full specifications, layout drawings and options are in the product catalogue.

Applications in detail

The Spinner 2200 S is the largest machine in the Spinner range. Its ring takes cross-sections up to 1600 × 1100 mm or 2000 × 800 mm, and it uses 500 mm wide film – twice the width of the Spinner 1800 S – so large pallets, panel stacks and long heavy loads are wrapped with fewer turns and fewer roll changes.

Pallets and heavy loads

Large and long pallets, board stacks and heavy loads are wrapped horizontally as they travel through the ring. The same ring is the heart of the fully automatic Spinner 2200 S Pallet line, which in a Detroit installation handles building-material loads of up to 3 tonnes. Read the case study.

Sandwich, roof and wood panels

Panel stacks are wrapped on all four sides along their whole length, protecting coated faces and edges from rain, dust and scratches on the way to the construction site. For long roof and ceiling panels, see the Spinner 2200 S Panel Line and our panel packaging page.

Bed bases and large cabinets

Oversized bed bases, stacks of bases and large bedroom and kitchen cabinets that exceed the Spinner 1800 S are wrapped in one pass.

Profiles, pipes and long products

Large bundles of aluminium, steel and wood profiles, pipes and PVC profile products are wrapped as one pack. For steel tubes and heavy profiles, see our tube and pipe packaging page.

Choosing between the Spinner models

All Spinner S machines work on the same principle; the ring size decides the cross-section you can wrap. Choose the Spinner 2200 S when your loads are wider than 1500 mm or taller than 1300 mm, or when you want 500 mm film for long stacks. For smaller pallets and panels, the Spinner 1800 S is more compact.

Model	Max. cross-section (W × H)	Min. product size	Film width	Ring speed	Conveyor	Weight
Spinner 600 S	400 × 250 / 535 × 140 mm	100 × 18 × 550 mm	170 mm	20–85 rpm	15 m/min	560 kg
Spinner 1000 S	700 × 450 / 950 × 185 mm	100 × 18 × 600 mm	170 mm	20–85 rpm	12 m/min	620 kg
Spinner 1500 S	950 × 800 / 1350 × 500 mm	200 × 18 × 700 mm	250 mm	15–60 rpm	10 m/min	1200 kg
Spinner 1800 S	550 × 1300 / 1500 × 950 mm	700 × 200 × 1000 mm	250 mm	10–50 rpm	12 m/min	1820 kg
Spinner 2200 S	1600 × 1100 / 2000 × 800 mm	700 × 400 × 2000 mm	500 mm	10–35 rpm	Customised	Depends on conveyor

The two cross-section values show the corners of the circular ring capacity: a product can be wider if it is lower. Use the calculator above to check intermediate sizes.

Stretch film for the Spinner 2200 S

The machine takes stretch film rolls up to 500 mm wide and 230 mm in diameter on a 76 mm core, in 23, 30 or 35 micron. Wider film means fewer turns for the same coverage, which matters on stacks that are many metres long.

• 23 micron is usually enough for dust and scratch protection on light products that travel in boxes or on pallets.
• 30 micron is a common all-round choice for doors, panels, furniture parts and profile bundles.
• 35 micron suits heavy loads, sharp-edged metal profiles and products that are stored outdoors or shipped over long distances.

Film consumption depends mainly on overlap: the relation between conveyor speed and ring speed. A slower conveyor or a faster ring lays more turns per metre and gives a stronger pack; a faster conveyor saves film. Because both speeds are adjustable on the operator panel, the overlap can be set per product instead of wrapping everything with the heaviest setting.

Installation and integration

The wrapping unit of the Spinner 2200 S is 3450 mm wide and 3100 mm long; overall length and weight depend on the conveyor, which is customised to each customer’s product range. It runs on 380 V, 50/60 Hz three-phase power with neutral and earth, with a main motor of 4.4 kW and a total installed power of 5.6 kW.

Loads usually arrive by forklift or directly from production on roller conveyors. Edda designs the heavy-duty roller conveyors, transfers and buffer zones around the wrapper, up to complete automated end-of-line systems.

Operation, maintenance and service

Day-to-day operation comes down to loading the 500 mm film roll, choosing the product settings on the panel and keeping the conveyor clear. Routine care is simple: keep the conveyor and film path clean, check the film carriage and cutting area, and follow the maintenance intervals in the operating manual.

Edda machines run in more than 80 countries. Installation, training and service are provided by Edda and its local distributors, with remote support from our engineers in Bursa, Türkiye, where the machines are designed and built.

Why manufacturers choose Edda

• Türkiye’s first manufacturer of horizontal stretch wrapping machines
• Machines running in over 80 countries, supported by local distributors
• A complete range, from compact wrappers to fully automated packaging lines, including Spinner 2200 S pallet and ceiling/roof panel lines

Related machines

• Spinner 1800 S: for smaller pallets and panels
• Spinner 2200 S Pallet Wrapping Line: fully automatic end-of-line pallet packaging
• Spinner 2200 S Ceiling & Roof Panel Packaging Line: for long ceiling and roof panels

Frequently asked questions

What is the minimum product size the Spinner 2200 S can wrap?

700 x 400 x 2000 mm (W x H x L). There is no upper limit on product length.

Which stretch film does it use?

Rolls up to 500 mm wide and 230 mm diameter, on a 76 mm core, in 23, 30 or 35 micron thickness.

Is the conveyor a standard length?

No, the conveyor is customised to the customer’s product range and throughput needs.

What power supply does it need?

380 V, 50/60 Hz, three-phase with neutral and earth; total installed power is 5.6 kW.

What is the largest cross-section the Spinner 2200 S can wrap?

Up to 1600 × 1100 mm or 2000 × 800 mm (W × H). Use the calculator above for sizes in between.

Why 500 mm film?

Wider film covers more length per ring turn, so long stacks are wrapped with fewer turns and the operator changes rolls less often.

Can it be part of a fully automatic line?

Yes. The same ring is used in the Spinner 2200 S Pallet end-of-line system and the Spinner 2200 S Panel Line.

How long is the conveyor?

The conveyor is customised to your product range and throughput, so the overall machine length depends on your project.

Which film thickness should I use?

23 micron is enough for light protection, 30 micron is a common all-round choice and 35 micron suits heavy loads, sharp edges and outdoor storage. The machine takes all three on Ø230 mm rolls with a Ø76 mm core.

Can the conveyor carry very heavy loads?

Yes. Because the conveyor is designed for each project, roller design and load capacity are chosen for your heaviest load; heavy-duty roller conveyors are available.

Compare this model with our full range of horizontal stretch wrapping machines for profiles, doors, panels, furniture and coils.