Spinner 600 S Automatic Orbital Stretch Wrapping Machine

What the Spinner 600 S wraps

• Door frames and mouldings
• Laminate flooring
• Aluminium, steel and wood profiles and pipes
• PVC profile products

Minimum product size is 100 x 18 x 550 mm (W x H x L); there is no upper limit on product length.

How it works

The product travels along the belt conveyor (up to 15 m/min, 100 kg/m load capacity) through the film ring, which rotates at 20 to 85 rpm to wrap a continuous spiral of stretch film around it. Film width is up to 170 mm, with a maximum roll diameter of 230 mm on a 76 mm core, in 23, 30 or 35 micron thickness.

Key specifications

Product length	Unlimited
Min. product size (W x H x L)	100 x 18 x 550 mm
Max. conveyor speed	15 m/min
Ring rotation speed	20-85 rpm
Stretch film	Up to 170 mm wide, 230 mm diameter, 76 mm core
Main motor power	1.1 kW (total power 2.04 kW)
Power supply	380 V, 50/60 Hz, 3P+N+PE
Machine size (W x H x L)	1600 x 1520 x 2105 mm
Weight	560 kg

Full specifications, layout drawings and options are in the product catalogue.

Applications in detail

The Spinner 600 S is the compact model of the Spinner range, built for slim, long products: frames, mouldings, trims, flooring packs and profiles with cross-sections up to 535 mm wide. Its conveyor runs at up to 15 m/min, the fastest in the Spinner S range, which suits lines where many small parts come off the machine every minute.

Door frames, mouldings and trims

Frame parts, architraves, skirting boards and decorative mouldings are wrapped one by one or as small bundles straight after profiling, painting or foiling. The tight spiral of film keeps the surface clean and stops pieces rubbing against each other when they are stacked or boxed. For parts that also need cushioning, the Spinner 600 S BN adds an air bubble layer in the same pass.

Laminate flooring packs

Flooring packs are wrapped as a single unit, which holds the boards together and protects edges and click profiles from chipping in handling and transport.

Aluminium, steel, wood and PVC profiles

Profiles and pipes are wrapped individually or in small bundles as they leave the cutting saw or the extrusion line. Full orbital coverage protects anodised, painted or foiled surfaces and keeps bundles together without straps. See our profile packaging page for complete line examples.

Small furniture and joinery components

Narrow furniture parts, rails, handles and joinery components can be wrapped in batches on the same machine by changing conveyor and ring speed on the operator panel.

Choosing between the Spinner models

All Spinner S machines work on the same principle; the ring size decides the cross-section you can wrap. Choose the Spinner 600 S when your products stay within 535 mm width and 250 mm height; if doors, cabinet fronts or wider panels are part of the range, the Spinner 1000 S is the better fit.

Model	Max. cross-section (W × H)	Min. product size	Film width	Ring speed	Conveyor	Weight
Spinner 600 S	400 × 250 / 535 × 140 mm	100 × 18 × 550 mm	170 mm	20–85 rpm	15 m/min	560 kg
Spinner 1000 S	700 × 450 / 950 × 185 mm	100 × 18 × 600 mm	170 mm	20–85 rpm	12 m/min	620 kg
Spinner 1500 S	950 × 800 / 1350 × 500 mm	200 × 18 × 700 mm	250 mm	15–60 rpm	10 m/min	1200 kg
Spinner 1800 S	550 × 1300 / 1500 × 950 mm	700 × 200 × 1000 mm	250 mm	10–50 rpm	12 m/min	1820 kg
Spinner 2200 S	1600 × 1100 / 2000 × 800 mm	700 × 400 × 2000 mm	500 mm	10–35 rpm	Customised	Depends on conveyor

The two cross-section values show the corners of the circular ring capacity: a product can be wider if it is lower. Use the calculator above to check intermediate sizes.

Stretch film for the Spinner 600 S

The machine takes stretch film rolls up to 170 mm wide and 230 mm in diameter on a 76 mm core, in 23, 30 or 35 micron.

• 23 micron is usually enough for dust and scratch protection on light products that travel in boxes or on pallets.
• 30 micron is a common all-round choice for doors, panels, furniture parts and profile bundles.
• 35 micron suits heavy loads, sharp-edged metal profiles and products that are stored outdoors or shipped over long distances.

Film consumption depends mainly on overlap: the relation between conveyor speed and ring speed. A slower conveyor or a faster ring lays more turns per metre and gives a stronger pack; a faster conveyor saves film. Because both speeds are adjustable on the operator panel, the overlap can be set per product instead of wrapping everything with the heaviest setting.

Installation and integration

The Spinner 600 S is the smallest machine in the range: 1600 mm wide, 1520 mm high and 2105 mm long, weighing 560 kg. It runs on 380 V, 50/60 Hz three-phase power with neutral and earth, with a total installed power of 2.04 kW, so it can be placed directly after a saw, a profiling machine or a paint line.

Products can be loaded by hand or fed from an existing conveyor, and wrapped parts can go to a buffering table, a stacking station or straight to boxing. Edda builds the conveyors and line equipment around the wrapper and complete automated packaging lines such as the Speedwrap Profiline for profile plants.

Operation, maintenance and service

Day-to-day operation comes down to loading the film roll, choosing the product settings on the panel and keeping the conveyor clear. Routine care is simple: keep the belt and film path clean, check the film carriage and cutting area, and follow the maintenance intervals in the operating manual.

Edda machines run in more than 80 countries. Installation, training and service are provided by Edda and its local distributors, with remote support from our engineers in Bursa, Türkiye, where the machines are designed and built.

Why manufacturers choose Edda

• Türkiye’s first manufacturer of horizontal stretch wrapping machines
• Machines running in over 80 countries, supported by local distributors
• A complete range, from compact wrappers like the Spinner 600 S to fully automated packaging lines

Related machines

• Spinner 1000 S: for longer and heavier profiles
• Spinner 600 S BN: bubble wrap and stretch film in a single pass
• Framewrap series: for window and door frames

Frequently asked questions

What is the minimum product size the Spinner 600 S can wrap?

100 x 18 x 550 mm (W x H x L), with no upper limit on length.

Which stretch film does it use?

Rolls up to 170 mm wide and 230 mm diameter, on a 76 mm core, in 23, 30 or 35 micron thickness.

Can it apply bubble wrap as well?

Yes, in the Spinner 600 S BN version, which applies bubble film and stretch film in a single pass.

What power supply does it need?

380 V, 50/60 Hz, three-phase with neutral and earth; total installed power is 2.04 kW.

How many parts per hour can the Spinner 600 S wrap?

It depends on product length, the gap between parts and the overlap you choose. At the maximum conveyor speed of 15 m/min, a 1.5 m long moulding passes the ring in about 6 seconds. Send us your product list and we will calculate the output for your mix.

What is the largest cross-section?

Up to 400 × 250 mm or 535 × 140 mm (W × H). Use the calculator above for sizes in between.

What is the difference between the Spinner 600 S and the Spinner 1000 S?

The Spinner 1000 S has a larger ring (up to 950 mm wide) for doors, cabinet fronts and wider profiles; the 600 S is more compact and has a faster conveyor for slim parts.

Can short parts be wrapped?

Yes. Parts down to 550 mm long can be wrapped, and short pieces can be grouped into bundles on the conveyor.

Compare this model with our full range of horizontal stretch wrapping machines for profiles, doors, panels, furniture and coils.