Spinner 1000 S Automatic Orbital Stretch Wrapping Machine

What the Spinner 1000 S wraps

• Membrane, acrylic and lacquer-painted cabinet fronts
• Bathroom and kitchen cabinet components
• Doors, door frames and mouldings
• Laminate flooring
• Aluminium, steel and wood profiles and pipes
• PVC profile products

Minimum product size is 100 x 18 x 600 mm (W x H x L), with no upper limit on product length.

How it works

The product is carried through the ring on the belt conveyor (up to 12 m/min, 100 kg/m load capacity) while the film carriage rotates at 20 to 85 rpm, applying a continuous spiral of stretch film. Film width is up to 170 mm, with a maximum roll diameter of 230 mm on a 76 mm core, in 23, 30 or 35 micron thickness.

Key specifications

Product length	Unlimited
Min. product size (W x H x L)	100 x 18 x 600 mm
Max. conveyor speed	12 m/min
Ring rotation speed	20-85 rpm
Stretch film	Up to 170 mm wide, 230 mm diameter, 76 mm core
Main motor power	1.5 kW (total power 2.3 kW)
Power supply	380 V, 50/60 Hz, 3P+N+PE
Machine size (W x H x L)	1996 x 2000 x 2105 mm
Weight	620 kg

Full specifications, layout drawings and options are in the product catalogue.

Applications in detail

The Spinner 1000 S is sized for products that are long, relatively flat and up to 950 mm wide – the cross-sections that make up most of the furniture-component, door and profile market. These are the jobs it is most often set up for.

Cabinet fronts and furniture components

Membrane-pressed, acrylic and lacquered fronts leave the press or the paint line with surfaces that mark easily. Wrapping them straight off the line in a tight spiral of stretch film keeps dust and fingerprints off and stops stacked fronts rubbing against each other in the box or on the pallet. For high-gloss parts, the Spinner 1000 S BN adds an air bubble layer under the film in the same pass.

Doors, frames and mouldings

Door leaves up to 950 mm wide (at heights up to about 185 mm) or 700 mm wide (at heights up to 450 mm) pass through the ring with no length limit, so the same machine wraps a 600 mm frame part and a 2.4 m door leaf. Mouldings and architraves can be wrapped one by one or as small bundles. More on this application on our door packaging page.

Laminate flooring and panel packs

Flooring packs and thin panels are wrapped as a single bundle, which holds the boards together and protects the edges and tongue-and-groove profiles from chipping during handling.

Aluminium, steel, wood and PVC profiles

Profiles and pipes are wrapped individually or in bundles as they come off the cutting or extrusion line. Full orbital coverage keeps the decorative or anodised surface clean and prevents profiles scratching each other in the bundle. For higher line speeds, see the Speedwrap 550 and our profile packaging page.

Choosing between the Spinner models

All Spinner S machines work on the same principle; the ring size decides the cross-section you can wrap. If most of your products fit the Spinner 1000 S but a few are wider, it is usually better to size the machine for the largest product you ship regularly.

Model	Max. cross-section (W × H)	Min. product size	Film width	Ring speed	Conveyor	Weight
Spinner 600 S	400 × 250 / 535 × 140 mm	100 × 18 × 550 mm	170 mm	20–85 rpm	15 m/min	560 kg
Spinner 1000 S	700 × 450 / 950 × 185 mm	100 × 18 × 600 mm	170 mm	20–85 rpm	12 m/min	620 kg
Spinner 1500 S	950 × 800 / 1350 × 500 mm	200 × 18 × 700 mm	250 mm	15–60 rpm	10 m/min	1200 kg
Spinner 1800 S	550 × 1300 / 1500 × 950 mm	700 × 200 × 1000 mm	250 mm	10–50 rpm	12 m/min	1820 kg
Spinner 2200 S	1600 × 1100 / 2000 × 800 mm	700 × 400 × 2000 mm	500 mm	10–35 rpm	Customised	Depends on conveyor

The two cross-section values show the corners of the circular ring capacity: a product can be wider if it is lower. Use the calculator above to check intermediate sizes.

Stretch film for the Spinner 1000 S

The machine takes stretch film rolls up to 170 mm wide and 230 mm in diameter on a 76 mm core, in 23, 30 or 35 micron.

• 23 micron is usually enough for dust and scratch protection on light components that travel in boxes or on pallets.
• 30 micron is a common all-round choice for doors, fronts and profile bundles.
• 35 micron suits heavier bundles, sharp-edged metal profiles and products that are stored outdoors or shipped over long distances.

Film consumption depends mainly on overlap: the relation between conveyor speed and ring speed. A slower conveyor or a faster ring lays more turns per metre and gives a stronger pack; a faster conveyor saves film. Because both speeds are adjustable on the operator panel, the overlap can be set per product instead of wrapping everything with the heaviest setting.

Installation and integration

The Spinner 1000 S has a footprint of 1996 × 2105 mm, a height of 2000 mm and weighs 620 kg, so it fits at the end of most edge-banding, painting, pressing or cutting lines without structural work. It runs on 380 V, 50/60 Hz three-phase power with neutral and earth, with a total installed power of 2.3 kW.

Products can be loaded by hand onto the infeed conveyor or fed directly from an existing line. On the outfeed side, wrapped parts can go to a buffering table, a stacking station or straight to boxing. Edda also builds the conveyors and line equipment around the wrapper, and complete automated packaging lines when wrapping is one step in a longer sequence.

Operation, maintenance and service

Day-to-day operation comes down to loading the film roll, choosing the product settings on the panel and keeping the conveyor clear. Routine care is simple: keep the belt and film path clean, check the film carriage and cutting area, and follow the maintenance intervals in the operating manual.

Edda machines run in more than 80 countries. Installation, training and service are provided by Edda and its local distributors, with remote support from our engineers in Bursa, Türkiye, where the machines are designed and built.

Why manufacturers choose Edda

• Türkiye’s first manufacturer of horizontal stretch wrapping machines
• Machines running in over 80 countries, supported by local distributors
• A complete range, from compact wrappers to fully automated packaging lines

Related machines

• Spinner 600 S: for smaller cross-sections
• Spinner 1500 S: for larger and heavier products
• Spinner 1000 S BN: bubble wrap and stretch film in a single pass
• Framewrap series: for window and door frames

Frequently asked questions

What is the minimum product size the Spinner 1000 S can wrap?

100 x 18 x 600 mm (W x H x L). There is no upper limit on product length.

Which stretch film does it use?

Rolls up to 170 mm wide and 230 mm diameter, on a 76 mm core, in 23, 30 or 35 micron thickness.

Can it apply bubble wrap as well?

Yes, in the Spinner 1000 S BN version, which applies bubble film and stretch film in a single pass.

What power supply does it need?

380 V, 50/60 Hz, three-phase with neutral and earth; total installed power is 2.3 kW.

How many products per hour can the Spinner 1000 S wrap?

It depends on product length, the gap between products and the overlap you choose. As a guide, at the maximum conveyor speed of 12 m/min a 2 m long product passes the ring in about 10 seconds. Send us your product list and we will calculate the output for your mix.

Can I wrap several short parts together?

Yes. Short parts can be placed on the conveyor as a bundle and wrapped together. Single parts down to 600 mm long can be wrapped with the short-part bridge option: a sheet-metal plate fixed only to the infeed conveyor spans the gap between the conveyors, so short parts cross without falling while the stretch film slides off underneath it.

What is the difference between the Spinner 1000 S and the Spinner 600 S?

The Spinner 600 S has a smaller ring (up to 535 mm wide) and a faster conveyor (15 m/min) for frames, mouldings and slim profiles. The Spinner 1000 S takes cross-sections up to 950 mm wide for doors, fronts and wider profiles.

Can the machine be connected to my production line?

Yes. The wrapper can take products directly from an existing conveyor and pass them on to buffering, stacking or boxing. Tell us about your line and we will propose the layout.

Compare this model with our full range of horizontal stretch wrapping machines for profiles, doors, panels, furniture and coils.