The Spinner 2200 S panel packaging line is an automatic orbital stretch wrapping line for sandwich panels, roof panels, ceiling panels and large stacks of aluminium, steel or wooden panels. Its 2200 mm class orbital ring wraps panel stacks of unlimited length with 500 mm wide stretch film, sealing them against rain, dust and surface damage on the way to the construction site. Designed and built in Bursa by Edda, Türkiye’s first manufacturer of horizontal stretch wrapping machines.
What the Spinner 2200 S packs
- Sandwich panels and insulated roof and wall panels
- Ceiling panels and suspended ceiling systems
- Aluminium, steel and wooden panel stacks
- Large, long panel packs of unlimited length
How the line works
Panel stacks travel on the infeed roller conveyor into the Spinner 2200 S orbital ring. While the conveyor moves the stack forward, the ring rotates at 10–35 rpm and wraps 500 mm wide stretch film around it with a controlled overlap, giving a tight, weatherproof pack. The wrapped stack is carried out on the outfeed roller conveyor for strapping, labelling or forklift pick-up. The standard line is 3450 x 3150 x 13450 mm and can be extended to suit your production layout.
Technical specifications
| Feature | Value |
|---|---|
| Max. product length | Unlimited |
| Min. product dimensions (W x H x L) | 700 x 800 x 2500 mm |
| Stretch film width (max.) | 500 mm |
| Film roll diameter (max.) | Ø230 mm (max. 9 kg) |
| Film core diameter | Ø76 mm |
| Recommended film thickness | 23, 30, 35 micron |
| Main motor power | 4.4 kW |
| Ring rotation speed | 10 – 35 rpm |
| Standard line dimensions (W x H x L) | 3450 x 3150 x 13450 mm |
| Power supply | 380 V, 50/60 Hz, 3P+1N+1G (208/415/480 V optional) |
| Total weight | 3200 kg |
Full specifications, layout drawings and options are in the product catalogue.
Applications in detail
The Spinner 2200 S panel packaging line wraps sandwich panels, roof and ceiling panels and large stacks of aluminium, steel or wooden panels with 500 mm wide stretch film, sealing them on all four sides along their whole length against rain, dust and surface damage.
Sandwich and insulated panels
Panel stacks with coated metal skins are protected on the way to the construction site. See our panel packaging page.
Roof and ceiling panels
Long roof and ceiling panels are wrapped as complete stacks of unlimited length.
Aluminium, steel and wooden panel stacks
Large stacks are wrapped tightly so they stay together in handling and storage.
How the panel line works
Panel stacks travel on the infeed roller conveyor into the Spinner 2200 S orbital ring. While the conveyor moves the stack forward, the ring rotates at 10–35 rpm and wraps 500 mm wide stretch film around it with a controlled overlap. The wrapped stack is carried out on the outfeed roller conveyor for strapping, labelling or forklift pick-up.
- Minimum stack size 700 × 800 × 2500 mm, unlimited length.
- Stretch film 500 mm wide, 23–35 micron, rolls up to Ø230 mm and 9 kg.
- Standard line 3450 × 3150 × 13450 mm, about 3200 kg; extendable.
How an Edda line project runs
- Product and output review: your product range, dimensions, weights and the output the line must reach.
- Layout proposal: conveyor lengths, transfers, buffer zones and the position of the line in your plant.
- Engineering and build: the line is designed and built in Bursa, Türkiye, around your products.
- Installation and training: on-site installation and operator training by Edda and its local distributors.
- Service: remote support from our engineers and spare parts.
Because every line is engineered around a project, the final dimensions, weight and power depend on the configuration chosen.
Choosing the right line
Choose the Spinner 2200 S Panel Line for long panel stacks. For fully automatic end-of-line wrapping of pallets and board stacks, choose the Spinner 2200 S Pallet; for a stand-alone wrapper, the Spinner 2200 S.
| Line | Products | Wrapping | Key figures |
|---|---|---|---|
| Speedwrap Profiline | PVC and aluminium profiles up to 6000 mm | Stretch film, double cartridge | Up to 36 m/min; max. 260 × 270 mm |
| Shrink Nylon Lines | Profile and pipe bundles up to 6000 mm | 70 µm PE shrink film + banding | Up to 30 m/min; max. 250 × 250 mm |
| Heavy Duty Lines | Steel tubes, heavy profiles, long loads | Orbital stretch film | Ring 10–80 rpm; min. 100 × 20 × 1400 mm |
| Spinner 1800 Sofa Line | Sofas, armchairs, upholstered furniture | Bubble/foam + orbital stretch film | Bubble film up to 2000 mm; ring 10–50 rpm |
| Spinner 2200 S Panel Line | Roof, wall and ceiling panel stacks | Orbital stretch film, 500 mm | Min. 700 × 800 × 2500 mm; line 13.45 m |
| Spinner 2200 S Pallet | Pallets and board stacks, end of line | Orbital stretch film, 500 mm | Min. 700 × 400 × 2000 mm; layout 26 m |
Each wrapping unit is also available as a stand-alone machine; see our horizontal stretch wrapping machines and bubble wrap and stretch wrapping machines.
Installation and integration
The line runs on 380 V, 50/60 Hz three-phase power (208/415/480 V optional), with a main motor of 4.4 kW. The standard configuration is 3450 × 3150 × 13450 mm and can be extended to suit your production layout.
What to check before ordering
- Stack cross-section, length and weight.
- Stacks per shift.
- Outdoor storage time and overlap needed.
- Infeed from production and outfeed to strapping or forklift.
- Floor length for the line.
Operation, maintenance and service
Operators load film, choose product settings on the panel and supervise the flow; on fully automatic lines, the operator mainly changes film rolls and handles exceptions. Routine care includes keeping conveyors and film paths clean, checking the wrapping unit and cutting system, and following the maintenance intervals in the operating manual.
Edda machines run in more than 80 countries. Installation, training and service are provided by Edda and its local distributors, with remote support from our engineers in Bursa, Türkiye, where the machines are designed and built.
What a line typically includes
- Infeed: transfer tables, roller or belt conveyors, and centring or side guides.
- Wrapping or packing unit: the orbital ring, bubble unit, shrink and banding stations or other main machine.
- Outfeed: conveyors, buffer zones and transfer tables for unloading or palletising.
- Controls: a central operator panel with product settings for each item.
- Safety: guarding, light curtains and emergency stops as required, as in the Detroit end-of-line installation.
Every item is chosen and sized for your products, flow and building.
Benefits of automating this step
- The same protection on every product, regardless of shift or operator.
- Packing keeps pace with production instead of becoming a bottleneck.
- Fewer people needed for repetitive wrapping work.
- Less film waste than manual wrapping.
- Cleaner, more uniform packs that look professional on arrival.
Why manufacturers choose Edda
- Türkiye’s first manufacturer of horizontal stretch wrapping machines, building complete automated packaging lines in Bursa
- Machines and lines running in over 80 countries, supported by local distributors and remote service
- Each line is engineered around your product, layout and output target, from a single wrapper to a full end-of-line system
Related machines and lines
- Spinner 2200 S Pallet: fully automatic end-of-line wrapping for pallets and panel stacks
- Spinner 2200 S: stand-alone orbital stretch wrapping machine
- Heavy Duty Lines: orbital wrapping lines for steel tubes and heavy profiles
The orbital wrapper in this line is also available as a stand-alone machine: see our horizontal stretch wrapping machines.
Frequently asked questions
What panel sizes can the line wrap?
Stacks of unlimited length with a minimum size of 700 x 800 x 2500 mm (W x H x L).
Which stretch film does it use?
500 mm wide, 23–35 micron stretch film on Ø230 mm rolls of up to 9 kg with a Ø76 mm core.
How large is the standard line?
The standard configuration is 3450 x 3150 x 13450 mm and weighs about 3200 kg; conveyor lengths can be changed for your plant.
Is the wrap weatherproof?
Full orbital wrapping covers all four sides along the whole length, which protects panels from rain, dust and scratches during storage and transport.
What panel sizes can it wrap?
Stacks of unlimited length from 700 × 800 × 2500 mm.
Which film is used?
500 mm wide, 23–35 micron stretch film on rolls up to Ø230 mm and 9 kg.
Can the line be extended?
Yes. Conveyor lengths are adapted to your plant.
How long does a line project take?
It depends on the configuration and the season; we give a delivery time with the proposal.
Can you visit our plant?
Yes. Our sales and engineering team, or our local distributor, can visit to review your products and layout.
Get a quote for the Spinner 2200 S Panel Line
Tell us what you pack, the product dimensions and the output you need. Our team will reply with a configuration and price.