Spinner 1500 S Automatic Orbital Stretch Wrapping Machine

What the Spinner 1500 S wraps

• Bedroom furniture and bed bases
• Membrane, acrylic and lacquer-painted covers
• Bathroom and kitchen cabinets
• Doors, door frames and mouldings
• Laminate flooring, sandwich panels and wood panels
• Aluminium, steel and wood profiles and pipes, PVC profile products

Minimum product size is 200 x 18 x 700 mm (W x H x L), with no upper limit on product length.

How it works

The product is carried through the ring on the belt conveyor (up to 10 m/min, 100 kg/m load capacity) while the film carriage rotates at 15 to 60 rpm, applying a continuous spiral of stretch film. Film width is up to 250 mm, with a maximum roll diameter of 230 mm on a 76 mm core, in 23, 30 or 35 micron thickness.

Key specifications

Product length	Unlimited
Min. product size (W x H x L)	200 x 18 x 700 mm
Max. conveyor speed	10 m/min
Ring rotation speed	15-60 rpm
Stretch film	Up to 250 mm wide, 230 mm diameter, 76 mm core
Main motor power	2.2 kW (total power 3.4 kW)
Power supply	380 V, 50/60 Hz, 3P+N+PE
Machine size (W x H x L)	2741 x 3062 x 2105 mm
Weight	1200 kg

Full specifications, layout drawings and options are in the product catalogue.

Applications in detail

The Spinner 1500 S fills the gap between component wrappers and pallet-size machines. Its ring takes cross-sections up to 1350 mm wide or 800 mm high, so it handles assembled cabinets, bed bases, wide door sets and panel stacks as well as single panels and profiles – all with no limit on length.

Bedroom furniture and bed bases

Bed bases, headboards and bedroom furniture are wrapped in a tight spiral of film that keeps dust off and holds loose parts in place. For upholstered pieces that need cushioning, the Spinner 1500 S BN adds an air bubble layer in the same pass; see also our bed base packaging page.

Cabinets and covers

Assembled bathroom and kitchen cabinets and membrane, acrylic or lacquer-painted covers are wrapped straight from assembly or the paint line, protecting surfaces from scratches and fingerprints on the way to the customer.

Wide doors and door sets

Door leaves and door sets wider than the Spinner 1000 S can take – up to 1350 mm – pass through the 1500 ring, together with frames and mouldings. More on our door packaging page.

Panels, flooring and profiles

Laminate flooring, sandwich panels, wood panels and bundles of aluminium, steel, wood or PVC profiles are wrapped as one pack, which keeps edges intact and the bundle together. For long panel stacks see our panel packaging page.

Choosing between the Spinner models

All Spinner S machines work on the same principle; the ring size decides the cross-section you can wrap. Choose the Spinner 1500 S when your largest products are wider than 950 mm or taller than 450 mm; if you mainly wrap pallets or products over 1300 mm high, look at the Spinner 1800 S.

Model	Max. cross-section (W × H)	Min. product size	Film width	Ring speed	Conveyor	Weight
Spinner 600 S	400 × 250 / 535 × 140 mm	100 × 18 × 550 mm	170 mm	20–85 rpm	15 m/min	560 kg
Spinner 1000 S	700 × 450 / 950 × 185 mm	100 × 18 × 600 mm	170 mm	20–85 rpm	12 m/min	620 kg
Spinner 1500 S	950 × 800 / 1350 × 500 mm	200 × 18 × 700 mm	250 mm	15–60 rpm	10 m/min	1200 kg
Spinner 1800 S	550 × 1300 / 1500 × 950 mm	700 × 200 × 1000 mm	250 mm	10–50 rpm	12 m/min	1820 kg
Spinner 2200 S	1600 × 1100 / 2000 × 800 mm	700 × 400 × 2000 mm	500 mm	10–35 rpm	Customised	Depends on conveyor

The two cross-section values show the corners of the circular ring capacity: a product can be wider if it is lower. Use the calculator above to check intermediate sizes.

Stretch film for the Spinner 1500 S

The machine takes stretch film rolls up to 250 mm wide and 230 mm in diameter on a 76 mm core, in 23, 30 or 35 micron. The 250 mm film width covers more length per turn than the 170 mm film on the smaller models, which helps on wide and tall products.

• 23 micron is usually enough for dust and scratch protection on light products that travel in boxes or on pallets.
• 30 micron is a common all-round choice for doors, panels, furniture parts and profile bundles.
• 35 micron suits heavy loads, sharp-edged metal profiles and products that are stored outdoors or shipped over long distances.

Film consumption depends mainly on overlap: the relation between conveyor speed and ring speed. A slower conveyor or a faster ring lays more turns per metre and gives a stronger pack; a faster conveyor saves film. Because both speeds are adjustable on the operator panel, the overlap can be set per product instead of wrapping everything with the heaviest setting.

Installation and integration

The Spinner 1500 S measures 2741 × 3062 × 2105 mm (W × H × L) and weighs 1200 kg. It runs on 380 V, 50/60 Hz three-phase power with neutral and earth, with a main motor of 2.2 kW and a total installed power of 3.4 kW. The conveyor runs at up to 10 m/min.

Products can be loaded by hand or with a lifting device, or fed from an assembly or upholstery line. Edda builds the conveyors and line equipment around the wrapper and complete automated packaging lines when wrapping is one step in a longer sequence.

Operation, maintenance and service

Day-to-day operation comes down to loading the film roll, choosing the product settings on the panel and keeping the conveyor clear. Routine care is simple: keep the belt and film path clean, check the film carriage and cutting area, and follow the maintenance intervals in the operating manual.

Edda machines run in more than 80 countries. Installation, training and service are provided by Edda and its local distributors, with remote support from our engineers in Bursa, Türkiye, where the machines are designed and built.

Why manufacturers choose Edda

• Türkiye’s first manufacturer of horizontal stretch wrapping machines
• Machines running in over 80 countries, supported by local distributors
• A complete range, from compact wrappers to fully automated packaging lines

Related machines

• Spinner 1000 S: for smaller cross-sections
• Spinner 1800 S: for larger and heavier products
• Spinner 1500 S BN: bubble wrap and stretch film in a single pass

Frequently asked questions

What is the minimum product size the Spinner 1500 S can wrap?

200 x 18 x 700 mm (W x H x L). There is no upper limit on product length.

Which stretch film does it use?

Rolls up to 250 mm wide and 230 mm diameter, on a 76 mm core, in 23, 30 or 35 micron thickness.

Can it apply bubble wrap as well?

Yes, in the Spinner 1500 S BN version, which applies bubble film and stretch film in a single pass.

What power supply does it need?

380 V, 50/60 Hz, three-phase with neutral and earth; total installed power is 3.4 kW.

What is the largest cross-section the Spinner 1500 S can wrap?

Up to 950 × 800 mm or 1350 × 500 mm (W × H). Use the calculator above for sizes in between.

Can it wrap assembled cabinets?

Yes. Assembled bathroom and kitchen cabinets within the ring capacity are wrapped as one piece, with no limit on length.

What is the difference between the Spinner 1500 S and the Spinner 1500 S BN?

The BN version adds an air bubble film layer under the stretch film in the same pass, for products that need extra surface protection.

How many products per hour can it wrap?

It depends on product length, gaps and overlap. At the maximum conveyor speed of 10 m/min, a 2 m long product passes the ring in about 12 seconds. Send us your product list and we will calculate the output for your mix.

Compare this model with our full range of horizontal stretch wrapping machines for profiles, doors, panels, furniture and coils.