Edda’s Crosswrap machines wrap tyres, wheels, rims, hose coils and electrical cable coils in stretch film around their full circumference. The product advances on a conveyor and is wrapped in real time, so the film follows the circular shape instead of a straight pass – a tight, clean pack without hand wrapping.
Why circular products are hard to wrap
Tyres, wheels and coils are round, heavy for their size and awkward to handle. A standard horizontal wrapper is designed for straight, long products, and wrapping a coil by hand is slow, tiring and gives a different result every time. Loose film lets dust, moisture and UV reach rubber, metal and cable insulation.
- Hand wrapping of coils and tyres is slow and hard on operators.
- Loose or uneven film lets coils unwind and tyres pick up dirt in storage.
- Rims and wheels need surface protection against scratches in transport.
- Packing has to keep up with extrusion, winding or tyre production lines.
Two Crosswrap models
Choose by the outside diameter and width of your largest product.
Crosswrap 1000S
Ø450–700 mm, up to 400 mm wide
Compact model for passenger tyres, rims, hose coils and cable coils. Stretch film up to 170 mm, ring speed 20–85 rpm.
Crosswrap 1500S
Ø650–950 mm, up to 800 mm wide
Larger ring opening for bigger tyres, wheels and coils. Stretch film up to 250 mm, ring speed 20–60 rpm.
How 360° coil wrapping works
The tyre or coil advances on the conveyor into the rotating ring, which wraps stretch film around the full circumference of the product in real time. The film follows the circular profile rather than a straight pass, and the conveyor keeps the product moving so that each new turn overlaps the last.
Ring speed and conveyor speed are set independently on the operator panel. More overlap gives a stronger pack for heavy coils; a lighter setting saves film on products that only need dust protection. Both models take 23, 30 or 35 micron stretch film on Ø230 mm rolls with a Ø76 mm core.
Key figures at a glance
| Crosswrap 1000S | Crosswrap 1500S | |
|---|---|---|
| Product size (Ø × width) | Ø450 × 100 to Ø700 × 400 mm | Ø650 × 100 to Ø950 × 800 mm |
| Stretch film width | Up to 170 mm | Up to 250 mm |
| Ring speed | 20–85 rpm | 20–60 rpm |
| Conveyor | 1300 mm useful, up to 12 m/min, 100 kg/m | 1900 mm useful, up to 12 m/min, 100 kg/m |
| Working height | 950 mm | 900 mm |
| Total power | 3.3 kW | 4.1 kW |
| Machine size (W × H × L) | 2191 × 2341 × 3020 mm | 2575 × 3115 × 3325 mm |
| Weight | 1170 kg | 1375 kg |
Both models run on 380 V, 50/60 Hz three-phase power. Full specifications are in the product catalogue.
What Crosswrap wraps
- Vehicle tyres and complete wheels
- Steel and alloy rims
- Garden, industrial and hydraulic hose coils
- Electrical cable and wire coils
- Other ring-shaped products within the size range
Not sure whether your product is within range? Send us its outside diameter, width and weight.
See the machines at work
What to check when choosing a coil wrapping machine
- Diameter range: the smallest and largest outside diameter you pack.
- Width: the widest tyre or coil, which decides between the 1000S and the 1500S.
- Weight: conveyor load capacity is 100 kg/m on both models.
- Protection: dust cover only, or a heavier wrap that also keeps coils from unwinding.
- Output: products per hour and how coils arrive from winding or production.
- Space: machine footprint of about 2.2 × 3.0 m (1000S) or 2.6 × 3.3 m (1500S), plus room for infeed and outfeed.
Frequently asked questions
Which products can Crosswrap wrap?
Vehicle tyres, wheels and rims, hose coils and electrical cable coils, and similar ring-shaped products within the size range.
What is the difference between the 1000S and the 1500S?
The 1500S has a larger ring opening (up to Ø950 × 800 mm), takes wider film (up to 250 mm) and has a longer conveyor, for bigger tyres, wheels and coils.
What is the minimum product size?
Ø450 × 100 mm on the Crosswrap 1000S and Ø650 × 100 mm on the Crosswrap 1500S.
Can the film overlap be adjusted?
Yes. Ring speed and conveyor speed are set independently, which controls overlap and tension on each product.
What power supply is needed?
380 V, 50/60 Hz, 3P+1N+1G. Total installed power is 3.3 kW on the 1000S and 4.1 kW on the 1500S.
What information do you need for a quote?
Outside diameters, widths and weights of your products, output per hour and how products reach the wrapper.
Further reading
- All horizontal stretch wrapping machines
- How to choose an orbital wrapping machine
- All industries we serve
Get a quote for your coil and tyre wrapping
Tell us your product diameters, widths, weights and output. Our team will come back with a proposal.