Wraptor 1500 VPT 2700 Turntable Pallet Stretch Wrapping Machine

Key features

• Ø1500 mm turntable for pallets up to 1200 × 1000 mm and 1500 kg
• Wrapping height up to 2700 mm
• Table speed 4–12 rpm, adjustable
• Film tension: motorised pre-stretch 0–250%
• Front forklift loading
• Runs on 220 V single-phase power, 1 kW

Technical specifications

Table diameter	Ø1500 mm
Table speed	4–12 rpm
Max. pallet size (W × D)	1200 × 1000 mm
Max. wrapping height	2700 mm
Load capacity	1500 kg
Film tensioning	Motorised pre-stretch, 0–250%
Film width	500 mm
Max. film roll	Ø250 mm, 16 kg, Ø76 mm core
Power supply	220 V, 50/60 Hz, single-phase
Total power	1 kW
Machine dimensions (H × W × D)	2930 × 1500 × 2580 mm
Weight	600 kg

Full specifications, layout drawings and options are in the product catalogue.

Frequently asked questions

What is the difference between MB and VPT?

MB models use a mechanical brake to tension the film (0–100%). VPT models have a motorised pre-stretch carriage (0–250%), which uses less film per pallet and gives a tighter, more stable load.

What pallet size can it wrap?

Up to 1200 × 1000 mm (W × D), 1500 kg and 2700 mm high.

Do I need three-phase power?

No. The machine runs on 220 V single-phase power.

How fast does the table turn?

The table speed is adjustable from 4 to 12 rpm.

How much does pre-stretch save?

With up to 250% pre-stretch, one metre of film on the roll becomes up to 3.5 metres on the pallet; actual savings depend on your loads and settings.

Can it wrap pallets of different heights?

Yes. The film carriage travels up the mast to the top of each load, up to 2700 mm.

Which stretch film should I use?

Machine stretch film 500 mm wide on Ø76 mm cores, rolls up to Ø250 mm and 16 kg. Our team can recommend a film gauge for your loads.

Is a robot or a turntable better for my warehouse?

A turntable is usually faster and more repeatable for standard pallets in one location. A robot is better for oversized, heavy or irregular loads, and when loads are wrapped in different places.

Does pallet wrapping protect against moisture?

A full wrap with good overlap keeps dust and splashes off the load during storage and transport; for outdoor storage, a top sheet under the film gives extra protection.

Do you provide training?

Yes. Installation and operator training are provided by Edda and its local distributors.

Can the turntable machine be used for mixed pallets?

Yes. Any load within the pallet size, weight and height limits can be wrapped; wrapping settings can be adjusted for different loads.

Is a ramp available for pallet trucks?

Ask our team about loading options for your site; pallets are normally loaded from the front by forklift.

See all pallet stretch wrapping machines, or the Robowrap self-propelled pallet wrapper for oversized loads.

Where the Wraptor 1500 VPT 2700 is used

The Wraptor 1500 VPT 2700 is a semi-automatic turntable pallet wrapper with a Ø1500 mm table for pallets up to 1200 × 1000 mm and 1500 kg, wrapping up to 2700 mm high. Its motorised pre-stretch carriage stretches the film up to 250% for lower film use per pallet.

End of production lines

Finished goods are stacked on pallets at the end of the line and stretch wrapped before they go to the warehouse, so cartons and bags stay together during handling and storage.

Warehouses and distribution centres

Mixed pallets built from picked orders are wrapped before dispatch. A tight wrap holds cartons of different sizes together and keeps dust and moisture out.

Export shipments

Pallets that travel by truck, container or sea freight need a stable, well-tensioned wrap that keeps the load on the pallet over long distances.

Standard pallets in high numbers

Pallets up to 1200 × 1000 mm are loaded from the front by forklift and wrapped in a repeatable cycle, which is faster than a robot for standard pallets.

How a turntable pallet wrapper works

The pallet is placed on the turntable from the front with a forklift. The table rotates while the film carriage travels up and down the 2700 mm mast, so the film is applied in a spiral from the bottom to the top of the load and back. The table speed is adjustable, and the film tension is controlled by the pre-stretch carriage.

A turntable machine gives the same wrapping cycle on every pallet, which keeps quality consistent and is fast for standard pallet sizes. It runs on 220 V single-phase power, so no three-phase connection is needed.

Why motorised pre-stretch saves film

On VPT models, the film passes between two motor-driven rollers turning at different speeds, which stretch it by up to 250% before it reaches the load. A metre of film on the roll becomes up to 3.5 metres on the pallet, so film consumption per pallet falls and the film holds the load more tightly.

Pre-stretch is set on the panel, so light loads can be wrapped with less tension and heavy, stable loads with more.

Choosing the right pallet wrapper

Choose the Wraptor 1500 VPT 2700 for standard pallets up to 1200 × 1000 mm and 1500 kg. For pallets up to 1300 × 1100 mm and 2000 kg, choose the Wraptor 1650 VPT 2700; for oversized or very heavy loads, choose a Robowrap.

Model	Pallet / load size	Load capacity	Wrapping height	Film tension	Film width	Power	Weight
Robowrap 2700 MB	Unlimited (min. 700 × 700 mm)	No limit	2700 mm	Mechanical brake, 0–100%	200–500 mm	24 V DC battery, 220 V charger	340 kg
Robowrap 2700 VPT	Unlimited (min. 700 × 700 mm)	No limit	2700 mm	Motorised pre-stretch, 0–250%	500 mm	24 V DC battery, 220 V charger	355 kg
Wraptor 1500 VPT 2700	1200 × 1000 mm (Ø1500 mm table)	1500 kg	2700 mm	Motorised pre-stretch, 0–250%	500 mm	220 V single-phase, 1 kW	600 kg
Wraptor 1650 VPT 2700	1300 × 1100 mm (Ø1650 mm table)	2000 kg	2700 mm	Motorised pre-stretch, 0–250%	500 mm	220 V single-phase, 1 kW	825 kg

All models take film rolls up to Ø250 mm and 16 kg on a Ø76 mm core. For long loads wrapped horizontally along their length, see our orbital stretch wrapping machines and the Spinner 2200 S Pallet line.

Installation and daily use

The Wraptor 1500 VPT 2700 measures 2930 × 1500 × 2580 mm (H × W × D) and weighs 600 kg. It runs on 220 V, 50/60 Hz single-phase power with a total power of 1 kW. Pallets are loaded from the front by forklift; the table speed is adjustable from 4 to 12 rpm.

Keep the wrapping area clear of people while the machine is running, check the film path and carriage before each shift, and follow the maintenance intervals in the operating manual. Edda machines run in more than 80 countries. Installation, training and service are provided by Edda and its local distributors, with remote support from our engineers in Bursa, Türkiye.

What to check before ordering

• Pallet size: the largest and smallest pallets and the maximum load height.
• Load weight: the heaviest pallet you wrap.
• Volume: pallets per shift, which decides between a robot and a turntable.
• Load type: stable cartons, bags, irregular machinery or long loads.
• Film: tension method and film width; pre-stretch for lower film use.
• Space and power: floor area, forklift access and single-phase power.

Good practice for stable pallets

A pallet wrapper does the work, but a few settings decide how well the load travels:

• Tie the load to the pallet: extra turns at the bottom of the load wrap the film around the pallet deck, so the load cannot slide off it.
• Reinforce the top: extra turns at the top hold the upper layer of cartons together, where loads usually start to shift.
• Use enough overlap: each turn of film should overlap the previous one, so there are no gaps between the bands.
• Match tension to the load: light cartons need less tension than heavy, stable goods; too much tension can crush corners.
• Stack well: a square, stable stack with no overhang over the pallet edge wraps better and uses less film.

Our team can help you set up the wrapping for your loads during installation and training.